NuGen Audio Plugins Bundle 2014.02 R2R WiN MAC


NuGen.Audio.ISL.v1.2.0.Incl.Keygen-R2R
NuGen.Audio.ISL.v1.2.0.MacOSX.Incl.Keygen-R2R



ISL is a transparent look-ahead limiter designed to allow you to get on with creative audio production while it takes care of true-peak compliance for you.

ISL uses the standardised true-peak algorithms of ITU-R B.S. 1770 and related standards (including Apple ‘Mastered for iTunes’ true-peak detection), and is suitable for the control of audio for Post Production and Broadcast applications. True-peak limiting can also be used to ensure that down-stream Codecs (mp3, AAC etc.) do not introduce distortion into the signal.


Supported Standards

Our loudness products are compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1770, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM

Windows XP or above, 512 MB RAM


    NuGen.Audio.LMCorrect.v1.2.1.Incl.Keygen-R2R
    NuGen.Audio.LMCorrect.v1.2.1.MacOSX.Incl.Keygen-R2R



LM-Correct gives you a unique, immediate and hassle-free route to loudness-compliant audio in your day-to-day loudness workflow, saving you time and preventing costly mistakes.

Either within your NLE/DAW or as a stand-alone application, LM-Correct delivers automated compliance with True-Peak correction, solving your compliance issues on the spot. Used in conjunction with a real-time meter, LM-Correct saves iterative adjustments to the mix as you approach target levels, allowing transparent in-edit 'quick-touch' finishing of your audio. It’s an essential part of your loudness toolkit.


Supported Standards

Our loudness products are compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1770, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

LM-Correct supports AudioSuite (AAX) in both 64-bit and 32-bit versions. AudioSuite RTAS is also available as 32-bit only.

LM-Correct is also available as a stand alone application for Windows and OSX



Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM




     NuGen.Audio.Monofilter4.v4.1.9.Incl.Keygen-R2R
      NuGen.Audio.Monofilter4.v4.1.9.MacOSX.Incl.Keygen-R2R



When solid or natural sounding bass is a requirement in your recording projects, Monofilter provides the foundation for real power and definition.

The non-directional nature of low frequencies can often contribute to a perceived lack of clarity and focus in the mix. Adding stereo FX processing and using multiple mic. set-ups in the studio can introduce phase inconsistencies leading to ‘weak’, ‘hollow’ or ‘flat’ sounds.

Monofilter lets you align and balance low frequencies with the minimum of effort, leaving you with the same sound, yet louder, more focussed and better defined. And with Monofilter you can be sure of great playback performance on systems with separate low-frequency handling, such as club PAs, live rigs, home cinema systems, HiFi, and 2.1 gaming systems.

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM



NuGen.Audio.MultiMonitor.v1.0.3.Incl.Keygen-R2R



MultiMonitor provides the most powerful multi-channel loudness and true-peak metering available today. 16 meters, each capable of mono, stereo or 5.1 formats (that’s up to 96 simultaneous audio channels) give you individual True Peak and LUFS momentary displays. Every meter has a dedicated numeric Short Term and Integrated LUFS data display and meters can be colour-coded to aid grouping. Meters also feature a minimum and maximum short-term alerts function. MultiMonitor is fully compliant with CALM Act legislation, ITU-R BS1770/1, ATSC A/85, EBU R128 and other specific worldwide localisations.

MultiMonitor is great for monitoring multiple playback sources or audio sub-groups simultaneously with 5.1 and stereo PGM output alongside the console in the audio control room. It’s ideal also in the MCR, monitoring multiple studios and formats simultaneously.

Supported Standards

MultiMonitor is compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1170, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

Windows XP and above

SSL LMS-16
1RU PC + SSL Madi Xtreme 128 audio interface + GPI connectivity

Minimum System Specification

Windows XP or above, 512 MB RAM



    NuGen.Audio.SEQ1.Master.Edition.v1.2.8.MacOSX.Incl.Keygen-R2R
    NuGen.Audio.SEQ2.Master.Edition.v1.2.8.MacOSX.Incl.Keygen-R2R
    NuGen.Audio.SEQ-S.v0.2.0.Incl.Keygen-R2R
    NuGen.Audio.SEQ-S.v0.2.0.MacOSX.Incl.Keygen-R2R



SEQ-S gives you powerful sonic sculpting and EQ matching up to 7.1, with stereo mid-side operation and automated spectrum analysis. Massage and correct any audio with incredible resolution that you just can’t get with a traditional parametric interface.

A direct-draw interface and detailed spectrum analysis make it easy to quickly identify and specifically fine-tune your audio. Couple this with EQ matching via sonic fingerprinting and you have some unique possibilities.

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM



NuGen.Audio.Stereoizer3.v3.2.3.Incl.Keygen-R2R
NuGen.Audio.Stereoizer3.v3.2.3.MacOSX.Incl.Keygen-R2R



Stereoizer is a high-specification stereo image manipulation tool suitable for natural expansion, reduction and introduction of stereo width at any stage of the audio production process.

Developed for and tested by professional audio engineers, Stereoizer adds natural sounding width and depth to any audio recording, mono or stereo, leaving the inherent character of the original source intact. If you want a more coherent sound with polish and spatial balance but without adding artificial reverberation, chorusing or delay – Stereoizer is for you.


Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM


      NuGen.Audio.Stereoplacer3.v3.1.5.Incl.Keygen-R2R
      NuGen.Audio.Stereoplacer3.v3.1.5.MacOSX.Incl.Keygen-R2R



Stereoplacer is an advanced fine-tune parametric balancing control. You can tune each band into specific frequencies and move the frequency content around in the stereo sound stage. Just choose the position you want, and let Stereoplacer take care of preserving the balance of the original sounds.

With fully adjustable curves (bell, high and low shelving and even additional linked-harmonic overtones) you can redistribute stereo information with subtlety, or make powerful corrections – even moving hard-panned frequencies from one side to the other – without affecting the overall level balance of the material.

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM


NuGen.Audio.VisLM.v1.7.2.Incl.Keygen-R2R
NuGen.Audio.VisLM.v1.7.2.MacOSX.Incl.Keygen-R2R



With a unique design focused on primary loudness parameters, VisLM-H combines an instant overview with detailed historical information, enabling you to hit your target first time, every time.

Additional loudness logging and time-code functions allow for proof of compliance reporting and postmortem analysis with frame accurate referencing.

Economical efficiency

Elegant and simple to use, VisLM-H promotes a highly efficient workflow with the ability to drill down to any level of complexity the context demands. With VisLM-H, your loudness workflow is transparently integrated into the production environment.
Applications

Loudness normalisation introduces a common reference point for all stages of audio production, allowing audio professionals to remain in control of audio quality and meet the requirements of current and proposed legislation.

Supported Standards

Our loudness products are compatible with all recommendations and guidance based upon the international standard ITU-R B.S. 1770, revisions 1, 2 and 3 including:

ATSC A/85 (CALM ACT)
EBU R128
ARIB TR-B32
OP-59
AGCOM 219/9/CSP
DPP

Available formats

We support AAX, VST, AU and AudioSuite in both 64-bit and 32-bit versions. RTAS is also available as 32-bit only.

VisLM-H is also available as a stand alone application for Windows and OSX

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM
Windows XP or above, 512 MB RAM


          NuGen.Audio.Visualizer.v1.9.7.MacOSX.Incl.Keygen-R2R



Measure, understand, correct. Visualizer gives you indispensable audio analysis for quality audio production, with a standardised reference set of professional tools that let you work faster, avoid mistakes, repeat past success and understand the success of others.

Single Intelligent Window System

Visualizer’s unique intelligent window facility lets you select multiple view combinations, automatically resizing and aligning windows to maximise legibility and cross referencing information across screens. No need to switch between plugins to get the combination of views you want. User configurable presets let you switch instantly between setups and interface sizes to build the workflow that suits you.


Available formats

Visualizer supports VST and AU formats in 32 bit.

Minimum System Specification

Mac OSX 10.6.x, 512 MB RAM



see more @ http://www.nugenaudio.com/




Installation:

               
1.Uninstall previous versions.
2.Install the software.

[Activate Windows Computer]
1.Run our keygen.
2.Select specific product.
3.Push "Register This Computer (Windows)".

[Activate Other Computers]
1.Run our keygen on Windows.
2.Run the software.
3.Start Off-Line Activaion.
4.Copy Machine Key to our keygen.
 Only numbers are needed.
 ex) 1234567/XX -> 1234567
5.Push "Generate Fot Other Computers".
6.Activate with generated Unlock Code.  





          •  That's it! Done.

                            •  Supp0rt th3 D3v3lop3r if you liK3 it.

                        3Nj0Y!!!